We offer lenses without refraction (1.5 refractive index), with single refraction (1.6 refractive index and 100% UV protection) and double refraction (1.67 refractive index and 100% UV protection).
Recommendations
For lenses with low powers (-2.0 - 4.5 and +2.0 - +4.0) we recommend a thinned (refractive index 1.6) or unthinned lens.
Double gain is recommended for intensities (-4.0 - 7.0 or +3.5 - +5.5)
In addition to being lighter and thinner, double and triple thinned lenses offer 100% UV protection. However, a double-thinned lens is not optically superior to a single-thinned lens. We therefore recommend that you choose a thinner lens according to your strengths.
If you have a larger lens power than mentioned above, please contact our customer service.
You can close this window by clicking the CLOSE button on the right-hand side or by clicking outside the window.
Lens colours
You can choose clear or tinted lenses.
Clear lens: normal clear eyeglass lenses without tint.
Sunglass shade: tinted sunglass lenses.
Sun-darkening lenses: tinted sun-darkening lenses, also known as photochromic lenses.
Polarising lenses: tinted anti-glare lenses.
You can close this window by clicking the CLOSE button on the right-hand side or by clicking outside the window.
Pupillary distance or PD or KV value
The PD value (or KV value) tells you the distance between the pupils and is often found on the card that came with your glasses.
You can close this window by clicking the CLOSE button on the right-hand side or by clicking outside the window.
What kind of frames can be lensed?
Linssittämiseen sopivat kehykset:
Kaikki tavanomaiset hyväkuntoiset käytetyt ja uudet muovi- ja metallikehykset, joissa on linssit paikallaan.
Alla esimerkkejä kehyksistä, joihin olemme tehneet uudet linssit (voit klikata kuvaa suuremmaksi).
Kehykset joita ei voida linssittää:
Valmiit luku- ja aurinkolasit sekä edulliset asusteeksi tarkoitetut kehykset eivät sovellu linssitettäviksi. Valmislaseilla tarkoitetaan esim. kaupoissa myytäviä luku- ja aurinkolaseja. Valmislasien kehykset ovat usein niin heikkolaatuisia, etteivät ne kestä uusien linssien asennusta.
Siimakehykset/nylor-kehykset, joissa kehyksen alaosa on korvattu nailon- tai metallilangalla.
Kehyksettömät kehykset (ns. hengettömät), joissa linssien ympärillä ei ole lainkaan kehyksiä.
Erittäin kaarevat kehykset (yleensä urheilulasit) eivät sovellu linssitettäviksi.
Puukehykset ja älylasit
Jos olet epävarma onko kehyksesi sopiva linssittämiseen voit lähettää kuvan asiakaspalvelumme arvioitavaksi.
Below you will find sample images of the frames and frameless glasses.
Frameless frames (so-called breathless frames)
Silk frames (nylor glasses)
You can close this window by clicking the X button on the right-hand side or by clicking outside the window.
How to place an order
On the product page
Choose the range of vision (good or wide), the thinning, the colour and the additional features you want. The choices are made by clicking on the icons next to each step.
Choose whether to report the power data of your lenses immediately by entering it yourself or afterwards using the online form. You can also attach a picture of your spectacle prescription to your order and we will fill in the information for you. You will also need to enter the distance between your pupils, the PD (or KV).
Finally, press “Add to cart” and pay for your order on the checkout page.
After ordering
We will mail you an envelope to send you the lenses. Put your glasses in the envelope and take the envelope to the post office. The postage has been paid on your behalf. Leave your old lenses in the glasses.
We will notify you when your glasses have arrived. We will do a condition check on your frames and remove your old lenses.
We will make you new lenses based on the power levels you specify and fit the new lenses to your frames.
We will mail your glasses with new lenses to you and send you a tracking code by email to track your shipment. You will also receive your old lenses back in the package.
You can close this window by clicking on the X button at the top right or by clicking outside the window.
How to place an order
On the product page
First, choose the type of lenses (distance or multifocal). Then select your preferred field of view (multifocals only), dimming, colour and additional features. Selections are made by clicking on the icons next to each step.
Choose whether to report the power data of your lenses immediately by entering it yourself or afterwards using the online form. You can also attach a picture of your spectacle prescription to your order and we will fill in the information for you. You will also need to enter the distance between your pupils, the PD (or KV).
Finally, press “Add to cart” and pay for your order on the checkout page.
After ordering
We will mail you an envelope to send you the lenses. Put your glasses in the envelope and take the envelope to the post office. The postage has been paid on your behalf. Leave your old lenses in the glasses.
We will notify you when your glasses have arrived. We will do a condition check on your frames and remove your old lenses.
We will make you new lenses based on the power levels you specify and fit the new lenses to your frames.
We will mail your glasses with new lenses to you and send you a tracking code by email to track your shipment. You will also receive your old lenses back in the package.
You can close this window by clicking the X button on the right-hand side or by clicking outside the window.
How to place an order
On the product page
Choose your lenses for thinning, colour and additional features. Selections are made by clicking on the icons next to each step.
Choose whether to report the power data of your lenses immediately by entering it yourself or afterwards using the online form. You can also attach a picture of your spectacle prescription to your order and we will fill in the information for you. You will also need to enter the distance between your pupils, the PD (or KV).
Finally, press “Add to cart” and pay for your order on the checkout page.
After ordering
We will mail you an envelope to send you the lenses. Put your glasses in the envelope and take the envelope to the post office. The postage has been paid on your behalf. Leave your old lenses in the glasses.
We will notify you when your glasses have arrived. We will do a condition check on your frames and remove your old lenses.
We will make you new lenses based on the power levels you specify and fit the new lenses to your frames.
We will mail your glasses with new lenses to you and send you a tracking code by email to track your shipment. You will also receive your old lenses back in the package.
You can close this window by clicking on the X button at the top right or by clicking outside the window.
OLO® Anti-fog nanocoating is the first physical coating available in the Nordic countries that permanently and effectively prevents the fogging of eyeglasses! The lenses, which are well suited to northern conditions, prevent fogging and make everyday life easier, whether at work, in sports or outdoors. The anti-fog coating is also particularly suitable for people who wear face shields at work.
Benefits
Effective anti-fogging of glass
Optically neutral – does not degrade the optical properties of the lens
Physical and durable coating: the coating is directly on the lens material.
Easy to use: just activate after washing the glasses
No need for separate liquids
OLO® Frostproofs are well suited for sports, outdoor activities and work where you move between different warm spaces
OLO® Anti-fog is also suitable for work and situations where a mask is used
The video shows normal hard-coated lenses on the left and OLO Lenses® on the right. Water vapour rises from underneath the lenses directly onto the lenses.
Users’ experiences
“The field of vision at the top of the lens remained clear throughout the hour-long outdoor walk and I didn’t need to dry the lens of droplets to see ahead. The lenses did not fog up during the whole trip.”- Minna, Turku
“I was one of the first to test Piiloset’s frost-free OLOlins and just wow! The experience has been nothing but a plus. The world has become a much clearer place, and I don’t mind wearing a mask anymore.” – Leevi, Raisio
“I just got these lenses for my own use , absolutely great, didn’t fog up when I went with the mask on the bus, to the shop or wherever I had to go! Highly recommended!” – Tero, Helsinki
How does an anti-fog coating work?
Previous anti-fog coatings have required separate liquids to achieve anti-fog properties.OLO® Anti-fog is based on a nanocoating of the lenses. The coating induces a high surface energy on the lens surface, which breaks down water molecules into a transparent water film. This prevents vision-obstructing fogging and allows clear vision through the lenses even in challenging conditions.
Themicroscopic nanocoating of frost-freeOLOlins® is only about 5 nanometres thick. By comparison, human hair is about 100,000 nanometres in diameter and a human blood cell is about 7,000-8,000 nanometres in diameter.
On the left, a normal hard coating. On the right,OLO® Anti-fog breaks down large water molecules into a transparent film.
Availability at
OLO® Anti-fog coating is available for allOLOlinse® ( except OLO®basic ).OLO® Anti-fog is always hard coated. Anti-fog coating is also available for polarised and blue light protected lenses.
The function of the frost-free surface is enhanced by an activation line. The use of the cloth protects the coating from contaminants and soiling. After treatment with activation cloth, the lens surface is hydrophobic, i.e. water-repellent.
Kyllä, meidänkin sivumme käyttää evästeitä. Sivujemme toiminnan mahdollistamiseksi käytämme teknologioita, kuten evästeitä, tallentaaksemme anonyymejä laite- ja kävijätietoja. Sopiiko tämä sinulle?
Functional
Always active
Tekninen tallennus tai pääsy on ehdottoman välttämätön oikeutettua tarkoitusta varten, joka mahdollistaa tietyn tilaajan tai käyttäjän nimenomaisesti pyytämän palvelun käytön, tai ainoana tarkoituksena on viestinnän välittäminen sähköisen viestintäverkon kautta.
Asetukset
Tekninen tallennus tai pääsy on tarpeen laillisessa tarkoituksessa sellaisten asetusten tallentamiseen, joita tilaaja tai käyttäjä ei ole pyytänyt.
Tilastolliset
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
