Choosing a thinning

We offer lenses without refraction (1.5 refractive index), with single refraction (1.6 refractive index and 100% UV protection) and double refraction (1.67 refractive index and 100% UV protection).

Recommendations

For lenses with low powers (-2.0 - 4.5 and +2.0 - +4.0) we recommend a thinned (refractive index 1.6) or unthinned lens.
Double gain is recommended for intensities (-4.0 - 7.0 or +3.5 - +5.5)

In addition to being lighter and thinner, double and triple thinned lenses offer 100% UV protection. However, a double-thinned lens is not optically superior to a single-thinned lens. We therefore recommend that you choose a thinner lens according to your strengths.

If you have a larger lens power than mentioned above, please contact our customer service.

You can close this window by clicking the CLOSE button on the right-hand side or by clicking outside the window.

Lens colours

You can choose clear or tinted lenses.

Clear lens: normal clear eyeglass lenses without tint.
Sunglass shade: tinted sunglass lenses.
Sun-darkening lenses: tinted sun-darkening lenses, also known as photochromic lenses.
Polarising lenses: tinted anti-glare lenses.

You can close this window by clicking the CLOSE button on the right-hand side or by clicking outside the window.

Pupillary distance or PD or KV value

The PD value (or KV value) tells you the distance between the pupils and is often found on the card that came with your glasses.

You can close this window by clicking the CLOSE button on the right-hand side or by clicking outside the window.

What kind of frames can be lensed?

Linssittämiseen sopivat kehykset:

Kaikki tavanomaiset hyväkuntoiset käytetyt ja uudet muovi- ja metallikehykset, joissa on linssit paikallaan.

Alla esimerkkejä kehyksistä, joihin olemme tehneet uudet linssit (voit klikata kuvaa suuremmaksi).

Kehykset joita ei voida linssittää:

Valmiit luku- ja aurinkolasit sekä edulliset asusteeksi tarkoitetut kehykset eivät sovellu linssitettäviksi. Valmislaseilla tarkoitetaan esim. kaupoissa myytäviä luku- ja aurinkolaseja. Valmislasien kehykset ovat usein niin heikkolaatuisia, etteivät ne kestä uusien linssien asennusta.
Siimakehykset/nylor-kehykset, joissa kehyksen alaosa on korvattu nailon- tai metallilangalla.
Kehyksettömät kehykset (ns. hengettömät), joissa linssien ympärillä ei ole lainkaan kehyksiä.
Erittäin kaarevat kehykset (yleensä urheilulasit) eivät sovellu linssitettäviksi.
Puukehykset ja älylasit

Jos olet epävarma onko kehyksesi sopiva linssittämiseen voit lähettää kuvan asiakaspalvelumme arvioitavaksi.

Below you will find sample images of the frames and frameless glasses.

Frameless frames (so-called breathless frames)

You can close this window by clicking the X button on the right-hand side or by clicking outside the window.

How to place an order

On the product page

Choose the range of vision (good or wide), the thinning, the colour and the additional features you want. The choices are made by clicking on the icons next to each step.
Choose whether to report the power data of your lenses immediately by entering it yourself or afterwards using the online form. You can also attach a picture of your spectacle prescription to your order and we will fill in the information for you. You will also need to enter the distance between your pupils, the PD (or KV).
Finally, press “Add to cart” and pay for your order on the checkout page.

After ordering

We will mail you an envelope to send you the lenses. Put your glasses in the envelope and take the envelope to the post office. The postage has been paid on your behalf. Leave your old lenses in the glasses.
We will notify you when your glasses have arrived. We will do a condition check on your frames and remove your old lenses.
We will make you new lenses based on the power levels you specify and fit the new lenses to your frames.
We will mail your glasses with new lenses to you and send you a tracking code by email to track your shipment. You will also receive your old lenses back in the package.

You can close this window by clicking on the X button at the top right or by clicking outside the window.

How to place an order

On the product page

First, choose the type of lenses (distance or multifocal). Then select your preferred field of view (multifocals only), dimming, colour and additional features.
Selections are made by clicking on the icons next to each step.
Choose whether to report the power data of your lenses immediately by entering it yourself or afterwards using the online form. You can also attach a picture of your spectacle prescription to your order and we will fill in the information for you. You will also need to enter the distance between your pupils, the PD (or KV).
Finally, press “Add to cart” and pay for your order on the checkout page.

After ordering

We will mail you an envelope to send you the lenses. Put your glasses in the envelope and take the envelope to the post office. The postage has been paid on your behalf. Leave your old lenses in the glasses.
We will notify you when your glasses have arrived. We will do a condition check on your frames and remove your old lenses.
We will make you new lenses based on the power levels you specify and fit the new lenses to your frames.
We will mail your glasses with new lenses to you and send you a tracking code by email to track your shipment. You will also receive your old lenses back in the package.

You can close this window by clicking the X button on the right-hand side or by clicking outside the window.

How to place an order

On the product page

Choose your lenses for thinning, colour and additional features. Selections are made by clicking on the icons next to each step.
Choose whether to report the power data of your lenses immediately by entering it yourself or afterwards using the online form. You can also attach a picture of your spectacle prescription to your order and we will fill in the information for you. You will also need to enter the distance between your pupils, the PD (or KV).
Finally, press “Add to cart” and pay for your order on the checkout page.

After ordering

We will mail you an envelope to send you the lenses. Put your glasses in the envelope and take the envelope to the post office. The postage has been paid on your behalf. Leave your old lenses in the glasses.
We will notify you when your glasses have arrived. We will do a condition check on your frames and remove your old lenses.
We will make you new lenses based on the power levels you specify and fit the new lenses to your frames.
We will mail your glasses with new lenses to you and send you a tracking code by email to track your shipment. You will also receive your old lenses back in the package.

You can close this window by clicking on the X button at the top right or by clicking outside the window.

^{OLO® Anti-fog} treatment instructions

To ensure the longevity of the lenses and the performance of the anti-fog coating, the lenses should be cleaned and activated as required, usually every 1-3 days depending on use. For best results, follow the care instructions below:

1. Cleaning and drying

Clean the lenses of your glasses with water as usual. Use lukewarm water. NOTE! Do not use hot water, as this may damage the lens coating.
Dry the frames and lenses with a microfibre cloth or a soft, lint-free handkerchief.

Tip: We recommend Piiloset Cleaning Soap,Piiloset Foam Soap or a similar mild soap. You can also use lens cleaning wipes or other lens cleaning products.

2. Activation

The surface of the lens should not be wet, but a little moisture will enhance activation. If the lenses are completely dry, a light breath is sufficient to moisten the lenses. Wipe the lens surface lightly for about half a minute with the activation cloth supplied with the lens.

3. Finishing

If the activation cloth leaves stains on the lens, finish cleaning with a clean microfibre cloth.

Care instructions for the activation line

Do not wash or immerse the cloth in water.
Avoid contact with water.
Do not expose the cloth to heat or sunlight.
Keep the cloth clean.
Store the cloth in a resealable plastic bag.
New cloth every 6-12 months depending on use.

General points to note

Do not use Piiloset Anti-fog activation cloth for wet cleaning of lenses!
As with any lens or lens coating: do not use excessive force, abrasive materials, strong detergents or strong solvents when cleaning.